เหมือนมี firmware ออกใหม่เมื่อวันที่ 4 เดือน 10
แต่ก็แปลกที่มันยังเป็นเวอร์ชั่น 1.9.8.p
ขอลิ้งลองโหลดหน่อยสิครับ ![[ปลื่ม]](https://www.lcdtvthailand.com/webboard/Smileys/emotion/xpress04.gif "ปลื้ม")
http://www.cen-grand.com/cn/content/?106.htmlโดยอากู๋ :
Latest Firmware
5i-300 5i-360 5i-1600/1800 0918 edition forced to upgrade the firmware (1.9.8.P) released
This firmware is only for the Century Gray 5i-300, 360,1600,1800 users upgrade services, non-century Gray users do not use this firmware, otherwise it will cause the analog output silent. Before 2013, the century of undeclared over cpuid Gray user needs to provide relevant information machines in order to verify the firmware, the specific methods of operation are as follows;
Mandatory upgrade steps are as follows:
1: The upgrade process uNAND.img copied into the root directory of U disk, plug into the USB port on the machine.
2: upgrade the switch will force the RESET bit, press the power switch, indicator light long wait for 10-15 minutes.
3: Turn off the power switch, the switch will be forced to upgrade back to Normal position.
4: Press the power switch, use the remote control to reboot to complete the mandatory upgrade.
5: After the upgrade, the first start of longer than usual, about 1 minute.
Forced to upgrade to the U disk higher, if you encounter forced to upgrade the machine can not start, indicating that the upgrade was not successful.
SanDisk recommends using LEXAR or U-disk, do not recommend the use of U disk Kingston.
The upgrade process, U disk intermittently flashing lights on, shining around 20 seconds, off for 20 seconds.
If U disk indicator keeps flashing or not lit, the U-disk can not be properly upgraded.
Can not boot after the upgrade, indicating that the upgrade fails, all U disk problems.
-------------------------------------------------- ----------------------------------
This firmware is only for Century Gray 5i-A/AD users to upgrade, do not apply to other brands users, otherwise it will cause a silent failure.
2013 Gray 5i-A/AD century before users download the firmware upgrade, you need to report the cpuid, and machine code, time and place of purchase and other relevant information by e-mail sent to the specified mailbox (note; all information is complete we will You are the user finds Gray century), we confirm the century Gray user, your machine will be written into a certification documents cpuid go, you use the certification activate the firmware file, you can use the normal, if not activated, it will Caton phenomenon.
Has been declared over cpuid users do not have to re-declare.
Specific methods of operation are as follows:
CPUid reporting method:
1: After turning on the machine plug U disk, in the settings menu, select "Display Settings" - "Klik3 Theatre Activation" - "CPUid reporting" - OK.
2: Soon, the screen displays: success! If the display fails, please try again.
3: This U disk into your computer, you can see there is a text file: cpuid_upload.txt, send us this file.
4: while your machine model, the rear of the bar, buying time, place, simultaneously with the message sent over.
5: Send e-mail address is:
[email protected] , message subject, please indicate "CPUid".
6: Send mail when sending the setup requirements "request read receipt" so you can see if we have received your message.
Firmware authentication method:
1: cpuid reported, generally 2-3 days (holidays or special circumstances postponed) You will receive the official website or groups of users to publish verification file named "zhdsoftw.db".
2: Copy this file to the root directory of U, into the machine, boot, verify that it is done automatically.
3: Press the remote control on the "Apply" button, the screen will appear a red circle, the circle with a red slash. If it is "right to left", proved to be successful, if it is "left to bottom right," Authentication failed.
4: After successful authentication, please keep this validation file, to force you to upgrade, you need to use this document for verification. Of course, the official website can also be downloaded.
Authentication failed because:
1: You provide cpuid file has errors (unlikely).
2: You send us a message we have not received (part of the user's e-mail on the server side will be treated as spam deletion).
3: you do not provide the barcode machine, nor the time and place of purchase and other relevant information, we are not sure you are using our product, so do not enter your CPUid to verify the file.
4: You are not in this group of validation list, please wait for the next batch.
Click
HERE download the firmware
Return
วิธีอัพต่างจากที่ผ่านๆมา
แต่ยังไม่กล้าอัพ กลัวผิดขั้นตอน(ภาษาจีนก็งูๆปลาๆ ภาษาอังกฤษก็สเนคสเนคฟิชฟิช )
